Repairing a lath & plaster ceiling.

Latest Articles

Repairing a lath & plaster ceiling.
Page 1, 2, 3 Next

Downsizer Forum Index -> Make Your Own/DIY

Author

Message

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Sat Sep 10, 16 12:51 pm Post subject: Repairing a lath & plaster ceiling.

A friend has had a velux window fitted in the bathroom and the job did not include making good on the plasterwork which is an old lath & plaster construction (well, not old on the scale of these things.
I have read that it is best to repair with a lime mortar similar to what was originally used, but I have never worked with that so I know nothing much about it.
Any top tips? Or is it just easiest to use modern plasters?

Either way, what needs to be done in respect damp proofing, with regard to it being in a bathroom?

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Sun Sep 11, 16 10:18 am Post subject:

modern plaster is easier and more damp resistant ,avoid bonding coat/browning as the stuff is a sponge.

non hydrolic lime plaster ready mixed is around �10 for 25 kg and would do the job but

this stuff is super sticky and sets very hard which is ideal for patching around a velux at around �25 a bag

other patching plasters are available but if you go for one of them ask the builders merchants if they are suitable for A around a window frame and B in a bathroom and C will it stick to lath .

re sticking , wire brush the lath then prime with waterproof pva diluted 3 to 1 allowed to almost dry will help.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Sun Sep 11, 16 11:47 am Post subject:

dpack wrote:

modern plaster is easier and more damp resistant ,avoid bonding coat/browning as the stuff is a sponge...

So use an undercoat plaster that isn't bonding or browning?

Quote:

non hydrolic lime plaster ready mixed is around �10 for 25 kg and would do the job but

Sorry, but you're being ambiguous: lime plaster is the traditional stuff, so is that your recommendation if I want to take the traditional route?

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Sun Sep 11, 16 1:22 pm Post subject:

traditional = non hydraulic lime , 2 coats let the deep one set slowly keeping it damp then do a thin smooth top coat to level out any shrinkage and cracks, let it set slowly keeping it slightly damp .

non traditional but lime based = use the super plaster stuff one coat troweled level, let it set slightly damp.

another option is a bathroom rated one coat patching plaster, fill and trowel, let it set

browning and bonding are cheap (ie good for big deep areas) and usually end up nasty , the only thing they are good for are internal upstairs walls and even then i avoid them.

EDIT i would go for onecoat patching plaster unless a lime plaster was specified for a listed building which seems unlikely as they have a new velux

Last edited by dpack on Sun Sep 11, 16 1:56 pm; edited 1 time in total

Ty Gwyn

Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter

Posted: Sun Sep 11, 16 1:48 pm Post subject:
I presume with the opening cut for the velux there is a minimum of making good to be done on the lath work?

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Sun Sep 11, 16 3:27 pm Post subject:

dpack wrote:

Not at all bothered about being traditional, but it has to go on pretty thick, so I'm not planning to do it in one coat.

Ty Gwyn wrote:

I presume with the opening cut for the velux there is a minimum of making good to be done on the lath work?

Pretty minimal, yes.

Ty Gwyn

Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter

Posted: Sun Sep 11, 16 4:04 pm Post subject:
Thistle mixed with sand for the first coat,well pressed into the lath`s,then finish with a thistle coat,just as good if your not fussed on a traditional finish.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Mon Sep 12, 16 7:31 am Post subject:

Ty Gwyn wrote:

Thistle mixed with sand for the first coat,well pressed into the lath`s,then finish with a thistle coat,just as good if your not fussed on a traditional finish.

Damn. I've strimmed all the thistles. I'll have to wait for them to grow back...

On a more serious note, how much sand?
Thanks both for the tips.

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Mon Sep 12, 16 2:05 pm Post subject:

Ty Gwyn

Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter

Posted: Mon Sep 12, 16 7:18 pm Post subject:

Hairyloon wrote:

Ty Gwyn wrote:

Thistle mixed with sand for the first coat,well pressed into the lath`s,then finish with a thistle coat,just as good if your not fussed on a traditional finish.

Damn. I've strimmed all the thistles. I'll have to wait for them to grow back...

On a more serious note, how much sand?
Thanks both for the tips.

3 to 1

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Aug 29, 17 10:47 pm Post subject:

Ty Gwyn wrote:

Hairyloon wrote:

Ty Gwyn wrote:

Thistle mixed with sand for the first coat...

On a more serious note, how much sand?

3 to 1

Is that 3 sand to 1 thistle or the other way about?

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Tue Aug 29, 17 11:44 pm Post subject:
3 thistle to one sand might be a bit less crumbly

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Sat Sep 02, 17 10:45 pm Post subject:
And after all that, it is looking like a change of plan. The homeowner is thinking to simply screw plasterboard over the top... Aside from the difficulty of getting the screws through and into something solid enough, I can't see any real problem with that... The "aside" looks easier said than done mind you...

Mistress Rose

Joined: 21 Jul 2011
Posts: 16002

Posted: Sun Sep 03, 17 8:30 am Post subject:
We took down the lath and plaster ceilings at our first house before replacing them with plasterboard. Built a little bank in the garden with the plaster and used the laths on the fire. Think it would have been a bit tricky getting the plaster board on top. Still, might be worth a go, although if it doesn't work, could end up with the whole lot down and start again.

Slim

Joined: 05 Mar 2006
Posts: 6614
Location: New England (In the US of A)

Posted: Sun Sep 03, 17 6:20 pm Post subject:
I ended up covering up some plaster with drywall a couple years ago.... Make sure you've got a decent thickness, and lots of good attachment.

	Downsizer Forum Index -> Make Your Own/DIY	All times are GMT Page 1, 2, 3 Next
Page 1 of 3

View Latest Posts