|
|
Author |
|
Message | |
|
Mistress Rose
Joined: 21 Jul 2011 Posts: 15998
|
|
|
|
|
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
|
gregotyn
Joined: 24 Jun 2010 Posts: 2201 Location: Llanfyllin area
|
|
|
|
|
Mistress Rose
Joined: 21 Jul 2011 Posts: 15998
|
|
|
|
|
wellington womble
Joined: 08 Nov 2004 Posts: 15051 Location: East Midlands
|
|
|
|
|
crofter
Joined: 11 Feb 2007 Posts: 2252
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
wellington womble
Joined: 08 Nov 2004 Posts: 15051 Location: East Midlands
|
|
|
|
|
tahir
Joined: 28 Oct 2004 Posts: 45676 Location: Essex
|
|
|
|
|
Nick
Joined: 02 Nov 2004 Posts: 34535 Location: Hereford
|
|
|
|
|
Mistress Rose
Joined: 21 Jul 2011 Posts: 15998
|
Posted: Thu Oct 09, 14 6:41 am Post subject: |
|
We have a little alpine tractor that we bought to work in the coppice. It has the advantage over a quad bike that it twists in the middle so at least 3 wheels are always on the ground. Makes it a lot more stable and it will go where quads won't. Low impact too, so doesn't do much damage to the ground. We use it with a forwarder, mower, log splitter, and post ram attachments. Might be a bit more than you want, but definitely a useful machine for close packed stools.
When you cut the coppice, if you want to walk or take a vehicle in there, cut the stool so that the outside rods are slightly lower than the middle ones, but don't leave them spiky but there are not sharp edges, which is best done with a chainsaw. Then if you fall or drive over them there is less chance of getting a puncture in either a tyre or you. |
|
|
|
|
midtown
Joined: 18 Oct 2013 Posts: 4
|
|
|
|
|
|