Metposts or equivalent

Latest Articles

Metposts or equivalent
Page 1, 2 Next

Downsizer Forum Index -> Land Management

Author

Message

roobarb

Joined: 15 Apr 2008
Posts: 139
Location: Carmarthenshire

Posted: Mon Feb 03, 14 10:53 am Post subject: Metposts or equivalent

We're going to be using metposts (other brands are available I believe) to support our uprights of our new log store. I've done a bit of trawl around the internet and our local builders merchants. The prices vary a lot, but the cheapest I've found for the 100mmx100mm spiked and painted (not galvanised) ones is around ï¿½7.50 from ebay (they're not metposts but are similar). Anyone know were we could get them cheaper, or does that sound like a good deal? And should we pay the extra and go for galvanised ones or do people think the painted ones are okay. They will be in damp ground, but not saturated.

Also what's the advantages of the "system 2" twin bolt system over the wedge grip system? The timber we are buying is 4"x4" so I assume should fit the wedge grip system.

Ty Gwyn

Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter

Posted: Mon Feb 03, 14 11:31 am Post subject:
Why not concrete 4 short lengths of a metal in the ground,and bolt the timber to these above ground level.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Mon Feb 03, 14 11:34 am Post subject:
If you think you can wallop them into the ground without scratching the paint, then don't bother with galvanised. I think the advantage of the bolt system is that you can more easily replace the post.

vegplot

Joined: 19 Apr 2007
Posts: 21301
Location: Bethesda, Gwynedd

Posted: Mon Feb 03, 14 11:41 am Post subject:

I've never been a fan of them and as they put quite a lot of levering force at the foot of the post and water still pools in contact with the post.

For our wood shed I used 4" dia posts to build a skeleton framework with slopping roof, slatted sides and sat the whole on sacrificial timber sleepers. This allows air to circulate throughout and if the posts are bolted together you can easily move to a new location.

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Mon Feb 03, 14 5:09 pm Post subject:
rubbish for fences ,i would either go the concrete set metal,concrete or treated timber post option for a shed tis usually the roof blows off rather than the thing blows away but belt n braces is good

onemanband

Joined: 26 Dec 2010
Posts: 1473
Location: NCA90

Posted: Mon Feb 03, 14 6:38 pm Post subject:

I'm not a fan of metposts either.
Reasons VP gave, plus extra expense, uncertainty whether they will drive fully home,in position and straight, and they look ugly.
All that said - the only time I've used them, they did work well.
4x4 post concreted in, should give at least ten years service, especially if the shed has gutters.
Posts allways rot and snap at ground level - metposts don't keep post bottom much more above ground level.
If you are worried about rot then Ty Gwyn's suggestion of angle iron concreted in is good and cheap. Or a combo - fix angle iron to posts and concrete into the ground as normal- if post bottom rots the angle iron will still restrain the posts.
Personally I'd just concrete in the posts.

pollyanna

Joined: 03 Nov 2012
Posts: 221

Posted: Tue Feb 04, 14 12:10 am Post subject:
On Skomer they support the roof with Y-shaped metal set in concrete with a bolt through the wood. They must have the worst weather you can think of on the island, plus salt-laden winds, so they must be sturdy.

mousjoos

Joined: 05 Jun 2006
Posts: 1986
Location: VERY Sunny SW France

Posted: Tue Feb 04, 14 6:24 am Post subject:

I prefer treated posts concreted in the ground...continue the concrete above ground with in 4 - 5 inches of shuttering & gently slope the top surface away from the post; this way water can't pool around the post & any remaining dries sufficiently quickly
I built a stable block on very uneven ground for a client some years ago & it's as sturdy now as at the beginning
Stand the posts in preservative before building for as long as it takes for it to soak a good distance up the post, the once in the ground a few small rocks or stones in the bottom of the hole stop the post being in direct contact with the earth

If this is teaching you to suck eggs, apologies

Mistress Rose

Joined: 21 Jul 2011
Posts: 16000

Posted: Tue Feb 04, 14 8:00 am Post subject:

I wouldn't go for metposts either. They are very difficult to keep upright so your chances of having vertical posts are reduced.

You could either go for treated posts concreted in (go for Class 4 as ordinary treated aren't too good these days), or for real longevity, try chestnut and dig/ram them in if possible, or failing that a combination of digging and ramming. Cheapest way of getting them is from chestnut coppice. Most workers will provide them peeled, pointed and in the round for you. They are heavy though.

onemanband

Joined: 26 Dec 2010
Posts: 1473
Location: NCA90

Posted: Tue Feb 04, 14 12:48 pm Post subject:

Mistress Rose wrote:

...... as ordinary treated aren't too good these days

Yeh quality of timber in standard posts is awfull. If I ever have to cut with the grain or chisel them, the grain is all over the place. They bow and twist real easy too. I'd only give modern 3x3 posts 5 years.
What are they made from that makes them so poor quality?

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Tue Feb 04, 14 1:28 pm Post subject:

in clay ramming or dig and backfill( 500mm below for every m above and no rocks) is best as the heave from drying/wetting can make a lump of concrete move

the stuff re posts being rubbish from many suppliers is true ,code 4 or chestnut (or elm) if the ground is wet ,some folk char the underground bit of chestnut but i would use extra preservative on all cut ends

another option is railway sleepers as a footing with the shed built on top

Nick

Joined: 02 Nov 2004
Posts: 34535
Location: Hereford

Posted: Tue Feb 04, 14 1:30 pm Post subject:
Bet you're glad you asked now. A two hour weekend project has become a major civil engineering project. My tuppence? Get a steel fabricator to build you a proper store, and site it on a sheet of granite airlifted in from the Scottish Highlands. Enrobe it in Kevlar and obsidian. It'll last for years. Last edited by Nick on Wed Feb 05, 14 1:04 pm; edited 1 time in total

dpack

Joined: 02 Jul 2005
Posts: 46249
Location: yes

Posted: Tue Feb 04, 14 2:02 pm Post subject:

onemanband

Joined: 26 Dec 2010
Posts: 1473
Location: NCA90

Posted: Tue Feb 04, 14 8:32 pm Post subject:
@ Nick ....... and there's still the floor, walls and roof to discuss .....

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Feb 04, 14 10:21 pm Post subject:

Mistress Rose wrote:

You could either go for treated posts concreted in...

Having dug up the concreting from former treated posts I would advise against this.
If you're concreting them in, then go for concrete posts.
I've always been happy with Metposts or equivalent. The only time they've given me real trouble was when I had to put one in too close to a tree, and I could not stop it twisting... still held the fence up well enough.

	Downsizer Forum Index -> Land Management	All times are GMT Page 1, 2 Next
Page 1 of 2

View Latest Posts