Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Precision logging
Page Previous  1, 2
 
Post new topic   Reply to topic    Downsizer Forum Index -> Land Management
Author 
 Message
Mistress Rose



Joined: 21 Jul 2011
Posts: 15976

PostPosted: Fri Aug 08, 14 7:57 am    Post subject: Reply with quote
    

There is what looks like an electricity pole on the right, so I would suspect there is a power line across there.

Still not the sort of thing I would have anyone do near my house. I am not so sure about trees always going where you point them. Very few trees are dead straight all the way up with a completely even canopy, and it only takes a slight wind to send them off course as well. Conifers like that are easier than broadleaves, but you wouldn't believe the mess some of them can get themselves into even if they are not very tall.

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Fri Aug 08, 14 10:04 am    Post subject: Reply with quote
    

Mistress Rose wrote:
I am not so sure about trees always going where you point them.

I always inspect my hinge after a fell, especially if it did not go quite where I wanted it: most always the reason that it didn't is evidenced by the cut.
Quote:
Very few trees are dead straight all the way up with a completely even canopy, and it only takes a slight wind to send them off course as well.
A good hinge should steer it straight. Though as already observed: there is not much evidence of a hinge on the video.

Ty Gwyn



Joined: 22 Sep 2010
Posts: 4613
Location: Lampeter
PostPosted: Fri Aug 08, 14 10:44 am    Post subject: Reply with quote
    

The video quality was poor,first time i watched it ,it looked like the man was cutting from the direction of fall,
It would naturally have a V cut in the direction of fall,and i would`nt be surprised if there was a rope from the tree to the tractor taking up tension.

onemanband



Joined: 26 Dec 2010
Posts: 1473
Location: NCA90
PostPosted: Fri Aug 08, 14 11:00 am    Post subject: Reply with quote
    

Pause vid at 1:14 / 1:15 looks like pivoting on a v cut to me.



Ty Gwyn wrote:
i would`nt be surprised if there was a rope from the tree to the tractor taking up tension.


I had wondered that, but not something I have experience of and wondered if that tractor is heavy enough to do that.

dpack



Joined: 02 Jul 2005
Posts: 46223
Location: yes
PostPosted: Fri Aug 08, 14 11:16 am    Post subject: Reply with quote
    

having had a few more views of the video

i cant see anything that looks like a hinge.
the way the trunk slipped off the butt makes me think there must have been a gate but it isnt visible as far as i can see.

or for that matter any hint of a tension rope .

watching the last stage it seems that the wedges were what tipped it over,perhaps it was leaning a bit in the right direction but as above centre of gravity issues even with a fairly strait tree can be a bit unpredictable.

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Fri Aug 08, 14 2:12 pm    Post subject: Reply with quote
    

Whatever way you look at it, it worked.

Jam Lady



Joined: 28 Dec 2006
Posts: 2571
Location: New Jersey, USA
PostPosted: Fri Aug 08, 14 5:18 pm    Post subject: Reply with quote
    

When Paul cuts trees he makes a felling notch, then makes a cut from the opposite side, higher up. He calls it a hinge.

Back in October 2010 a friend helped drop a tree too big for Paul to tackle. He used wedges, which really interested me as it was not a technique with which we were familiar.



This happened up in the wood lot, so no house to drop it on. None-the-less, it went just where it was wanted to fall.

Of course I made an entry for my web site, which you can see here: https://www.bellewood-gardens.com/2010/Making%20Firewood_2010-12.html

There are some pictures of firewood, the tree he took down, and cutting it up.

dpack



Joined: 02 Jul 2005
Posts: 46223
Location: yes
PostPosted: Fri Aug 08, 14 5:42 pm    Post subject: Reply with quote
    

the way your pal dropped that is tidy,and the top of the gate(notch) can easily be seen on the cut trunk( unlike the one under scrutiny)

wedges are ace not just for fine direction control(and for tipping a big one) but also for releasing the bar if the tree sits back onto the cut

Jam Lady



Joined: 28 Dec 2006
Posts: 2571
Location: New Jersey, USA
PostPosted: Fri Aug 08, 14 9:31 pm    Post subject: Reply with quote
    

Oh yeah, pinch the bar and then stand back as the powerful language is released! That's where Paul likes the plastic wedges. Safer for the chain.

There was another interesting tree dropping earlier that same year for which we hired a company. Would have been so easy to drop it on the Forest Deck. Mike was the only one who'd even consider it, and he took two weeks to think about it plus a visit with his foreman.

https://www.bellewood-gardens.com/2010/Tree%20Cutting_2010-04.html

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Sat Aug 09, 14 8:22 am    Post subject: Reply with quote
    

Fairly obvious really: if you cannot take it down, then best put it back up.

Mistress Rose



Joined: 21 Jul 2011
Posts: 15976

PostPosted: Sat Aug 09, 14 8:27 am    Post subject: Reply with quote
    

The sort that hang up are the worst. A good job, but notice they still got a split out at the base.

We use wedges with aluminium ends, plastic, or even wood to guide the tree in the right direction. Trouble is, when there are trees all around, it is difficult to avoid hangups. We have recently got a winch to help us get them in the right position, pull them out and generally extract where we can't get the forwarder in.

Jam Lady



Joined: 28 Dec 2006
Posts: 2571
Location: New Jersey, USA
PostPosted: Sat Aug 09, 14 1:01 pm    Post subject: Reply with quote
    

There must be about a dozen widow makers hung up along the ridge crest. They uprooted, toppled, and hung up in Superstorm Sandy a few years ago. They can stay there until they rot and fall. Too dangerous for us, too expensive to hire it done. They're out of the way. Happy woodpeckers.

And we're still cutting, moving, splitting etc what toppled. There are a few down in the woods, right across the drainage creek. Difficult to cut and how to get them up and out of there - we'll work on the more maneuverable stuff first.

The storm damaged over 20 trees, mature red oaks - Quercus rubra. So sad.

dpack



Joined: 02 Jul 2005
Posts: 46223
Location: yes
PostPosted: Sat Aug 09, 14 3:50 pm    Post subject: Reply with quote
    

winch is the tool for hung ones

Jam Lady



Joined: 28 Dec 2006
Posts: 2571
Location: New Jersey, USA
PostPosted: Sat Aug 09, 14 5:19 pm    Post subject: Reply with quote
    

These are meter plus diameter at base, weighty red oak, healthy when toppled so lots of branches interlaced with branches of the trees they crashed into. Not level ground, they're on a slope.

Tell you what - if you're ever in the area give me a call. We can go take a look at them and you can offer suggestions. Looking forward to hearing from you. Soon?

dpack



Joined: 02 Jul 2005
Posts: 46223
Location: yes
PostPosted: Sat Aug 09, 14 5:44 pm    Post subject: Reply with quote
    

from here i recon insect /bird heaven and dont get too close

fallen and tangled are super for wildlife

Post new topic   Reply to topic    Downsizer Forum Index -> Land Management All times are GMT
Page Previous  1, 2
Page 2 of 2
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright � 2004 marsjupiter.com