Numpty electrical repair

Latest Articles

Numpty electrical repair

Downsizer Forum Index -> Make Your Own/DIY

Author

Message

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Thu Apr 13, 17 12:20 pm Post subject: Numpty electrical repair

Please bear with me, my usual standard of electrics is changing a lightbulb.

Jenna has a car seat with speakers in it which connect to an MP3 headphone socket. Someone has pulled the seat out of the car, and torn the wire which plugs into the headphone socket. If I strip the wire back to the metal bits, bodge them together and tape the thing up with electrical tape, will that fix it? I assume we are in no real danger of electrocution from a tablet, even if I get it badly wrong.

tahir

Joined: 28 Oct 2004
Posts: 45723
Location: Essex

Posted: Thu Apr 13, 17 12:25 pm Post subject:
Should be fine

dpack

Joined: 02 Jul 2005
Posts: 43767
Location: yes

Posted: Thu Apr 13, 17 12:33 pm Post subject:
it will work but using a section of connector block + tape will give a longer lasting and more effective repair (i avoided mentioning solder )

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Fri Apr 14, 17 8:29 am Post subject:
Too late to order anything. Pity, because I can't find the electrical tape now. (I found a soldering iron while cleaning out the garage. Probably best avoided)

Hairyloon

Joined: 20 Nov 2008
Posts: 15464
Location: Today I are mostly being in Yorkshire.

Posted: Fri Apr 14, 17 10:56 am Post subject:

wellington womble wrote:

(I found a soldering iron while cleaning out the garage. Probably best avoided)

Probably best practised with on some scrap: it would give a much better repair.
Get yourself some solder with lead in it though: is much easier to work with, even if it is illegal.

dpack

Joined: 02 Jul 2005
Posts: 43767
Location: yes

Posted: Fri Apr 14, 17 3:43 pm Post subject:

clean ends of wire by scraping with a sharp blade ,twist together, melt small blob of fluxed wire solder onto (cleaned) tip of iron, apply solder to wires, heat until it flows

or clean wire end and terminal on plug then solder as above ,slightly trickier as you need to get the wire and terminal to touch withone hand or a closes peg (or similar) and use the soldering iron with the other

tis pretty easy really

youtube probably has plenty of instructional videos

Nick

Joined: 02 Nov 2004
Posts: 34535
Location: Hereford

Posted: Fri Apr 14, 17 4:27 pm Post subject:
Twist the wires together and use superglue. For this it'll work grand.

dpack

Joined: 02 Jul 2005
Posts: 43767
Location: yes

Posted: Fri Apr 14, 17 7:02 pm Post subject:
aye but is superglue safer than solder

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Fri Apr 14, 17 7:13 pm Post subject:
Probably not, I'm still recovering from the Easter bonnet glue-gun burns. Thank you all. I will have a go.

OtleyLad

Joined: 13 Jan 2007
Posts: 2737
Location: Otley, West Yorkshire

Posted: Sat Apr 15, 17 5:49 am Post subject:
Best joining solution around are things called wago connectors. They are push fit, quick and permanent. Used by electricians everywhere. The lever type are suitable for finer/stranded cables. You can put them inside small (wago) boxes for a neater finish.

frewen

Joined: 08 Sep 2005
Posts: 11428

Posted: Mon Apr 17, 17 8:25 pm Post subject:
So how did you get on WW?

wellington womble

Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands

Posted: Thu Apr 20, 17 7:42 am Post subject:
The superglue didn't work. I've yet to try anything else, as we're on holiday. Also, the clutch on the car smells awful, and needs sorting if we're to get home.

frewen

Joined: 08 Sep 2005
Posts: 11428

Posted: Sat Apr 22, 17 10:08 pm Post subject:
Boo and double boo then

	Downsizer Forum Index -> Make Your Own/DIY	All times are GMT
Page 1 of 1

View Latest Posts