|
|
Author |
|
Message | |
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
gz
Joined: 23 Jan 2009 Posts: 8956 Location: Ayrshire, Scotland
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
gz
Joined: 23 Jan 2009 Posts: 8956 Location: Ayrshire, Scotland
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
Posted: Sun Apr 17, 22 10:57 am Post subject: |
|
cream white sort of, with fire stains and inclusions
not "normal" clay, maybe vermiculite among the mix, it looks a complex recipe
coarser and denser than my little silver and gold ones
at a guess drying them out is good before trying making one hot?
if they can handle 1350c i will be very happy, over 1500 would be ace
if they can handle 1350c for a while i will be quite happy
as an soft melt, open hearth or oven i recon they will work fine, metal kilns are hot
i have no plans to cast steel but slapping some alloys needs over 1400 and scorifying only needs about 1300c, in an oxidizing atmosphere for a while may be an issue, refractory hopefully ablation layer if required
soft metal casting and most smithing can be done with a log for a hearth
i like incalloy as a forge metal for rings, i do not have or want oxyacetylene here, i still have plenty of bar, charcoal and a lphv spraypaint blower should i need them
sparking is ideal and needs about 1500c to get a few whacks at a small bit |
|
|
|
|
gz
Joined: 23 Jan 2009 Posts: 8956 Location: Ayrshire, Scotland
|
|
|
|
|
Mistress Rose
Joined: 21 Jul 2011 Posts: 15998
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
sgt.colon
Joined: 27 Jul 2009 Posts: 7380 Location: Just south of north.
|
|
|
|
|
dpack
Joined: 02 Jul 2005 Posts: 46249 Location: yes
|
|
|
|
|
|