Fishing equipment questions

Latest Articles

Fishing equipment questions

Downsizer Forum Index -> Fishing

Author

Message

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Sun Sep 30, 07 4:26 pm Post subject: Fishing equipment questions

Fresh from our first attempt at sea fishing I have a few questions that I can't seem to find an answer to and would greatly appreciate some pointers.

Firstly when casting out small lures or spinners they didn't go that far on their own so I added some decent sized lead shot about 12 inches above the lure. This helped greatly but I can't seem to find out much about using weights with lures other than using a heavy lure. So, what's the best way to increase the casting distance of a light lure/spinner?

Secondly the books suggest washing any tackle used in fresh water to stop it going rusty. So I've washed my tackle and dried it, now should I lightly oil it with something like veg oil to stop further rust or would this put future fish off? I'm mainly thinking about hooks, lures and spinners that have rustable parts.

boisdevie1

Joined: 11 Aug 2006
Posts: 3897
Location: Lancaster

Posted: Sun Sep 30, 07 4:55 pm Post subject:

Longer distance casting. Are you using a fixed spool reel? If so, then consider using a lighter weight line as it should drop off the reel easier so your lure will go faster. Also make sure your rod is nice and whippy.
I'd have thought washing off your tackle (ahem) with fresh water alone would be OK. I'd be wary of oiling your tackle afterwards as I wonder if the smell would put fish off? Not sure about that though.

Bodger

Joined: 23 May 2006
Posts: 13524

Posted: Sun Sep 30, 07 6:06 pm Post subject:
If your lure is too light for your rod or if you havent got enough line on your reel, then you wont be able to cast very far, no matter what you do.

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Sun Sep 30, 07 7:59 pm Post subject:

boisdevie1 wrote:

Yep, fixed spool reel. Ideally I should use a lighter line and wait for a fine day. However, as we can't just nip down to the sea and have to plan well in advance we have to put up with the weather. When we went it was quite windy and the size of the rod and lightness of the line didn't have much effect. I understand what you're saying and I'll remember it when we have more opportunities.

bodger wrote:

If your lure is too light for your rod or if you havent got enough line on your reel, then you wont be able to cast very far, no matter what you do.

Plenty of line on the reel and adding weights certainly did vastly improve casting length, I'm just a little surprised that this doesn't seem to be mentioned when people discuss spinning and would like to know if anyone does do it and how add them correctly.

Bodger

Joined: 23 May 2006
Posts: 13524

Posted: Sun Sep 30, 07 8:09 pm Post subject:
You can cast these light spinners a fair distance if your rods action is designed to cast such weights. What pound line have you got on your reel ?

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Mon Oct 01, 07 6:57 am Post subject:
One rod had about 7kg line and the other much heavier, the rods are certainly not the most expensive ones! I know better rods and line will help but for now a cheap solution would be great. Some more googling has suggested a method of adding a 1 or 2ozs lead weight just in front of the lure so I'll try that next time.

Jonnyboy

Joined: 29 Oct 2004
Posts: 23956
Location: under some rain.

Posted: Mon Oct 01, 07 7:09 am Post subject:
15lb line seems a little excessive for spinning, and Bodger's advice to have your spool completely full of line is a good one.

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Mon Oct 01, 07 7:18 am Post subject:

Jonnyboy wrote:

15lb line seems a little excessive for spinning

I know but the cost of a proper spinning set-up would be what, at least �100? Adding a lead weight 10p? There's plenty of line on the reels.

Bodger

Joined: 23 May 2006
Posts: 13524

Posted: Mon Oct 01, 07 8:27 am Post subject:
Get onto E Bay TC, a light spinning set up comes at a far more reasonable price

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Mon Oct 01, 07 10:41 am Post subject:

After a bit more googling I've found this page. If you look for "Spinning Rigs" it shows two rigs and the bottom one is roughly what I'd come up with although I used 3 1.5g shot rather than the bullet/barrel lead, so I'm not mad after all.

I found the 4.5g of shot doubled the cast distance and didn't seem to cause the spinner to sink when reeling in so a very small bullet/barrel lead would seem ideal or I'll just stick to the shot.

https://www.geocities.com/tony2kuk/rigs.html

dpack

Joined: 02 Jul 2005
Posts: 46390
Location: yes

Posted: Mon Oct 01, 07 6:12 pm Post subject:
wd40 attracts most fish ,ace on tackle and line (aids casting as well) when adding larger wieghts (i use 40 to 100g but i have beasty beachcasting tackle) a sliding float , with a rubber band on the line to limit the sink depth , allows long casts and vertical as well as horizontal movement of the lure

fish (the other one)

Joined: 24 Dec 2006
Posts: 319

Posted: Fri Oct 05, 07 11:20 am Post subject:
heres a setup i use when spinning,the mono leader should be 4 foot.

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Fri Oct 12, 07 6:10 pm Post subject:
Thanks for the pic fish, that's what I'll use next time provided I can track down some small bullet leads.

Bodger

Joined: 23 May 2006
Posts: 13524

Posted: Sat Oct 13, 07 11:07 am Post subject:
Theres a shop across the road which has loads of them. If you are desperate, I'll be happy to post you some TC

Treacodactyl
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism

Posted: Sun Oct 14, 07 9:18 am Post subject:
Thanks for the offer but I need a few other bit's and bobs.

	Downsizer Forum Index -> Fishing	All times are GMT
Page 1 of 1

View Latest Posts