|
|
Author |
|
Message | |
|
northcotes4
Joined: 25 Jul 2005 Posts: 1
|
|
|
|
|
tawny owl
Joined: 29 Apr 2005 Posts: 563 Location: Hampshire
|
Posted: Mon Jul 25, 05 2:39 pm Post subject: |
|
I never rinse anything unless it's been used for something really starchy like pasta or if there's something actually burned on. Otherwise everything gets bunged in, pans etc on the bottom, more lightly soiled stuff on top. If anything comes out with marks on, I'll wash it then, but they are few and far between. I never bother using the rinse cycle either; there are only two of us, but we still end up using it at least every 2 days. I throw in my dishcloth, scouring sponges etc as well, so I don't have to use a hot wash cycle in the washing machine for them.
If you use 3-in-1 tablets, you shouldn't need salt or rinse aid, as they're already incorporated, in much smaller amounts than if you use them separately, so that cuts down on stuff going down the drain. In fact, if you use salt with the products, you can get glass corrosion.
Have a really good look round before you buy, and don't be afraid to look inside the machines. Try to get one with as much metal inside as possible - in particular, try to ensure that the filter mesh (the flat one that sits at the bottom that the cylindrical one goes into) is metal; the plastic ones perish really quickly with the heat, and if that breaks, you'll get bits of food in the washing arms and the machine won't wash properly. Smeg is a good make, and that's got a double arm on the bottom. Miele and Bosch are worth looking at too. I woudn't recommend Indesit or Candy, but maybe others have had different experiences with them.
Good article here: https://money.guardian.co.uk/ethicalliving/story/0,13437,1215683,00.html |
|
|
|
|
Mrs Fiddlesticks
Joined: 02 Nov 2004 Posts: 10460
|
|
|
|
|
dougal
Joined: 15 Jan 2005 Posts: 7184 Location: South Kent
|
Posted: Mon Jul 25, 05 3:01 pm Post subject: |
|
tawny owl wrote: |
If you use 3-in-1 tablets, you shouldn't need salt or rinse aid, as they're already incorporated, in much smaller amounts than if you use them separately, so that cuts down on stuff going down the drain. In fact, if you use salt with the products, you can get glass corrosion. |
On recent machines you can program in the local water hardness. And they adjust the salt/softening to suit - even to the extent of using salt in addition to what the 3/4-in-one tablets provide.
Excess salt (eg spilt when refilling), if left unattended, can/will cause corrosion of *stainless* steel (especially hardened knife blades). Not glass.
The salt is used for regenerating the water softener, not for washing in salty water (thats unhelpful - try shampooing with seawater!). The tablets "salt" is actually a different means of water softening.
AFAIK the glass etching that used to be common with dishwashers is down to the "detergent" mix - not for nothing do they say "avoid skin contact". I believe newer formulations are much less damaging. |
|
|
|
|
tawny owl
Joined: 29 Apr 2005 Posts: 563 Location: Hampshire
|
|
|
|
|
R�is�n
Joined: 30 Jul 2005 Posts: 578
|
|
|
|
|
jema Downsizer Moderator
Joined: 28 Oct 2004 Posts: 28239 Location: escaped from Swindon
|
|
|
|
|
R�is�n
Joined: 30 Jul 2005 Posts: 578
|
|
|
|
|
R�is�n
Joined: 30 Jul 2005 Posts: 578
|
|
|
|
|
Gertie
Joined: 08 Jan 2005 Posts: 1638 Location: Yorkshire
|
|
|
|
|
jema Downsizer Moderator
Joined: 28 Oct 2004 Posts: 28239 Location: escaped from Swindon
|
|
|
|
|
R�is�n
Joined: 30 Jul 2005 Posts: 578
|
|
|
|
|
puffedpride
Joined: 05 Nov 2005 Posts: 300 Location: bristol
|
|
|
|
|
jema Downsizer Moderator
Joined: 28 Oct 2004 Posts: 28239 Location: escaped from Swindon
|
|
|
|
|
pricey
Joined: 28 Feb 2005 Posts: 6444
|
|
|
|
|
|