Decking board

Latest Articles

Decking board

Downsizer Forum Index -> Make Your Own/DIY

Author

Message

sgt.colon

Joined: 27 Jul 2009
Posts: 7380
Location: Just south of north.

Posted: Fri Jun 29, 12 10:57 am Post subject: Decking board
I'm going to have a go at building some planters that are made out of decking. Please could someone tell me if the wood will need treating with anything? Thanks.

Went

Joined: 19 Mar 2006
Posts: 6968

Posted: Fri Jun 29, 12 11:00 am Post subject:
Untreated wood will rot fairly quickly if in constant contact with damp/wet soil - treat with a preservative and line with punctured plastic (to allow drainage) - although sometimes plastic can trap water. A couple of coats of a preservative will do well and can be re-treated every couple of years.

sgt.colon

Joined: 27 Jul 2009
Posts: 7380
Location: Just south of north.

Posted: Fri Jun 29, 12 11:22 am Post subject:
Thanks Gawber.

T.G

Joined: 13 Sep 2009
Posts: 7280
Location: Somewhere you're not

Posted: Fri Jun 29, 12 11:48 am Post subject:

As a side note: If you can get hold of some polystyrene from old packaging and put it in the bottom of the planter it will help prevent the roots of any plant sitting in water especially over winter (if, of course, you are not planning on taking them indoors) and it keeps the roots warm helping to prevent frost/ice bothering them as much.

Also yacht varnish works well on the inside of wooden planters.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Fri Jun 29, 12 11:57 am Post subject:
Decking board usually comes treated. You will need to treat any ends that you cut. I would also suggest that you line it with polythene. Nothing rots wood faster than soil contact, and there have been concerns raised that the wood preservative can leach into the soil. My opinion of the latter is that the rate of leaching is utterly insignificant, but I thought I would mention it.

sgt.colon

Joined: 27 Jul 2009
Posts: 7380
Location: Just south of north.

Posted: Fri Jun 29, 12 12:24 pm Post subject:
Thanks TG and Hairy. I'll see if I can find some polystyrene. Typical innit, I took some to the tip last week.

Mistress Rose

Joined: 21 Jul 2011
Posts: 15997

Posted: Sun Jul 01, 12 8:45 am Post subject:

Do you need to use decking to get the 'look' or because you have some over from another job? If not, you might like to look on Woodlots, or Coppice(?) for some locally grown and milled western red cedar. It won't last for ever in contact with soil, but should be good for a few years and has a natural preservative in it. Because of the bark it is a bit of a pain in the big mills, but a lot of mobile sawmill operators go for small lots which have been grown as a nurse species for hardwood plantation.

For anyone interested, it makes good outdoor cladding for buildings too.

love154

Joined: 20 Sep 2016
Posts: 12
Location: Dartford

Posted: Sat Apr 01, 17 11:37 pm Post subject:
use Railway Sleepers for flower beds much better

gz

Joined: 23 Jan 2009
Posts: 8955
Location: Ayrshire, Scotland

Posted: Sun Apr 02, 17 3:56 am Post subject:
I'd be wary of the preservative on railway sleepers

Mistress Rose

Joined: 21 Jul 2011
Posts: 15997

Posted: Sun Apr 02, 17 7:46 am Post subject:
If you can use untreated oak, chestnut, or western red cedar boards, all heartwood, they will last for a reasonably number of years without any treatment. They do rot eventually, but rotted boards can be replaced.

	Downsizer Forum Index -> Make Your Own/DIY	All times are GMT
Page 1 of 1

View Latest Posts