How Much Roof Insulation Have you Got?

Latest Articles

How Much Roof Insulation Have you Got?
Page Previous 1, 2

Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects

How much roof insulation have you got?

1 inch or less

[ 2 ]

2-3 inches

15%

[ 4 ]

4-5 inches

19%

[ 5 ]

6-7 inches

15%

[ 4 ]

8 + inches

30%

[ 8 ]

I've not got a roof / normal roof!

11%

[ 3 ]

Total Votes : 26

Author

Message

Alchemist

Joined: 02 Mar 2005
Posts: 123
Location: Aberdeenshire

Posted: Wed Nov 02, 05 11:42 am Post subject:
We've got four inches of glass wool, but it's backed with that bubble-wrap/foil stuff which is supposed to give us the equivalent of another few inches. Was a bit skeptical originally, but it actually seems pretty effective .

crackapple

Joined: 19 Jun 2005
Posts: 204
Location: teeside

Posted: Wed Nov 02, 05 11:47 am Post subject:
at my last house i had about 200mm (8") thats because i work for a company that makes polystyrene insulation boards. too warm in the summer but toasty in the winter. this house though only has about 4 inches of fibre that the builders put in.

ele

Joined: 05 Sep 2005
Posts: 814
Location: Derby

Posted: Wed Nov 02, 05 11:52 am Post subject:

Jonnyboy wrote:

Dunno, it's as deep as the joists though, so I would recon around 8 inches for a new build.

Building control are hot on it, as the guy was up there for a while poking around.

According to the leaflet I've got the current minimum building regulation amount is 10 inches! not sure if that applies to where you are.

If anyone has got 4 inches or less and are also looking into grants the website appears to be www.heatproject.co.uk

Jonnyboy

Joined: 29 Oct 2004
Posts: 23956
Location: under some rain.

Posted: Wed Nov 02, 05 12:03 pm Post subject:
What's two inches amongst friends?

hils

Joined: 08 Mar 2005
Posts: 568
Location: Nottingham

Posted: Wed Nov 02, 05 8:57 pm Post subject:
not alot!

Rob R

Joined: 28 Oct 2004
Posts: 31902
Location: York

Posted: Wed Nov 02, 05 10:34 pm Post subject:
Same here- there's hardly 2" of roof, let alone insulation

dpack

Joined: 02 Jul 2005
Posts: 46247
Location: yes

Posted: Tue Nov 15, 05 12:32 am Post subject:
im not sure til the asbestos men finish . im not kidding

Nanny

Joined: 17 Feb 2005
Posts: 4520
Location: carms in wales

Posted: Tue Nov 15, 05 7:54 am Post subject:
do boxes of books count? if so we have about 3 ft because the entire loft is stacked to the edges with boxes of books we probably have the most heat efficient loft in the world if that 's accepted underneath that i have no idea.i don't go in the loft which is where the monster spiders live

Will

Joined: 30 Jun 2005
Posts: 571
Location: Grenoside, Sheffield

Posted: Wed Nov 16, 05 9:13 am Post subject:
V. similar to Judith - though I think there may not be very much in the sloping sections. The horizontal sections have about 6 inches.

mochyn

Joined: 21 Dec 2004
Posts: 24585
Location: mid-Wales

Posted: Wed Nov 16, 05 9:56 am Post subject:
None: our upstairs rooms are in the roof, and have no ceiling as such. I'm planning to put up ship lap with that sheepy insulating material between it and the roof. One day...

dpack

Joined: 02 Jul 2005
Posts: 46247
Location: yes

Posted: Tue Nov 22, 05 6:37 pm Post subject:
not enough

Jb

Joined: 08 Jun 2005
Posts: 7761
Location: 91� N

Posted: Wed Nov 23, 05 9:50 am Post subject:
Either not enough or too much! I have about 10cm of insulation on the floor of the loft. I also have a combi boiler in the loft which over the last few nights has fired up the central heating on the frost protection leaving the house roasting at 22 degrees while the loft remains at a nice chilly 4 degrees - whats the best way to insulate the roof of the loft? (rather than the floor of the loft)

Alchemist

Joined: 02 Mar 2005
Posts: 123
Location: Aberdeenshire

Posted: Wed Nov 23, 05 11:41 am Post subject:

I insulated my loft by fitting rockwool between the rafters. My rafters are 150mm deep, so I fitted 100mm thick rockwool between them, using garden twine and a staple gun to make a criss-cross web between the rafters to hold them in place. The rockwool lays on the web, leaving 50mm of breathing space against the back of the sarking boards to allow air flow for removal of moisture. It's a pretty quick and dirty method, but works a treat, especially if you keep an eye out for B&Q's half-price deals (sponsored by one of the 'leccy companies).

Jb

Joined: 08 Jun 2005
Posts: 7761
Location: 91� N

Posted: Wed Nov 23, 05 1:09 pm Post subject:

Alchemist wrote:

Is twin adequate to hold that in place? I was thinking of something like that but either stapling laths across the rafters on which 2" of rockwool could sit or doing the same but with a plastic moisture membrame on which the insulation would sit. The latter seems to be recommended but using a lath strikes me as easier (ie I wont have large sheets of membrame to handle while crawling upside down through the attic and won't leave me trying to prevent the insulation all slipping and collecting in one ventilation blocking pile at the base of each rafter)

What do you do for ventilation at the apec of the roof? If I take the insulation all the way up then it will reduce the ventilation, if I run it short then it reduces the insluation

Alchemist

Joined: 02 Mar 2005
Posts: 123
Location: Aberdeenshire

Posted: Wed Nov 23, 05 3:46 pm Post subject:

I started laying (hanging?) the insulation about 2 months ago and it sits in place no problem with just twine. Lath would also work, but I used the twine in preference just because it seemed simpler at the time.I think the trick is to cut the wool slightly too wide for the spaces between the rafters so that there's a little friction.
I have actually backed up the wool with a reflective membrane which is basically two layers of aluminium foil with bubble-wrap sandwiched between. I stapled this to the backs of the rafters and sealed the edges with aluminium foil tape. This is great for banishing any remaining draughts, largely eliminating the thermal break from the rafters, and claims to be a good insulator in its own right. I tend to agree that crawling around with this stuff in the attic is not easy, but ours is floored out, which at least means I can sit down whilst i'm working with it.

Ventilation at the apex in our case is simply due to the gaps between the slates and the steel apex cover. No problem with ventilation there I assure you! I stopped the insulation about 200mm short of the apex on the inside to give a reasonable air channel. I never did check up on the recommendations in the books, which may be wise if your house is a bit newer and better sealed than ours, but I have checked the sarking a few times since and everything seems dry.

If you want I can post some photos. It's a bit of a work in progress due to the number of jobs under way on the place, so you'll be able to see what i'm doing easily enough.

	Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects	All times are GMT Page Previous 1, 2
Page 2 of 2

View Latest Posts